He3 Handgrip for Leica Q3 (28 & NEW 43!) - LIMITED EDITION! CLEAR ANODIZED in SILVER
Designed for the Leica Q3 (both the 28 AND the 43!), this hand grip offers features not found on hand grips currently on the market. The patent pending design features functions used by passionate photographers, all integrated into one platform, integrated into one unified product.
The He3 is NOT compatible with the Q2 (please look to the He2 for that!), and could potentially cause physical damage to the Q2 if there is an attempt to marry the two. The He3 utilizes a registration pin that aligns with a hole absent on the Q2, and the lack of the registration hole will cause the pin on the He3 to impact the base plate of the Q2. Also notable, due to differences in the bottom arrangement of the compartments, access to those compartments would be restricted.
THIS IS A VERY SPECIAL EDITION, and is limited to ONE. The finish in natural silver aluminum was just too lovely to not offer it, so we are having two done in a clear anodized finish. We only have one image of the test sample, so the images below are not representative of the final product. There will be NO returns accepted for these, so please be sure you want it in silver.
Key Features:
Made of fully CNC’d 6061-T6 aluminum for a combination of exceptional strength and light weight. Each are hand-assembled and inspected individually. Every single one.
A modular thumb grip attachment that frees up the hot shoe for full use and access without compromising the desire for a thumb support, and still allows full uncompromising access to all controls and original function buttons. It can be removed and replaced with a structural cover plate in the event the user prefers none or an alternate solution.
Access to battery and SD card without the removal of the grip.
Provision to accommodate Leica’s Finger Loop accessory.
Accommodates an Apple AirTag™ securely and invisibly.
Arca-Swiss mount compatible.
Peak Design Capture Clip and Travel Tripod compatible without any need of an adapter plate.
Additional #1/4-20 screw mount for additional accessories.
Bottom anchor lug to allow wrist or Leica CL style camera strap configurations, also sized for easy attachment of a Peak Design anchor.
Anti-tamper approach, where access to the Apple AirTag™ requires removal of the grip, and the grip securing screw is an anti-tamper design.
Mounting screw incorporates a retaining clip to prevent loss of the screw.
High Density EVA padding on contact surfaces to protect the camera.
Center of lens mark on base plate to aid in aligning with tripod/clamp mounts center axis.
Anticipated Shipping date of Pre-orders : April 7, 2025
Please note : We do NOT collect duties, customs charges, nor VAT charges for international orders. The purchaser will be responsible for these and any related charges.
Designed for the Leica Q3 (both the 28 AND the 43!), this hand grip offers features not found on hand grips currently on the market. The patent pending design features functions used by passionate photographers, all integrated into one platform, integrated into one unified product.
The He3 is NOT compatible with the Q2 (please look to the He2 for that!), and could potentially cause physical damage to the Q2 if there is an attempt to marry the two. The He3 utilizes a registration pin that aligns with a hole absent on the Q2, and the lack of the registration hole will cause the pin on the He3 to impact the base plate of the Q2. Also notable, due to differences in the bottom arrangement of the compartments, access to those compartments would be restricted.
THIS IS A VERY SPECIAL EDITION, and is limited to ONE. The finish in natural silver aluminum was just too lovely to not offer it, so we are having two done in a clear anodized finish. We only have one image of the test sample, so the images below are not representative of the final product. There will be NO returns accepted for these, so please be sure you want it in silver.
Key Features:
Made of fully CNC’d 6061-T6 aluminum for a combination of exceptional strength and light weight. Each are hand-assembled and inspected individually. Every single one.
A modular thumb grip attachment that frees up the hot shoe for full use and access without compromising the desire for a thumb support, and still allows full uncompromising access to all controls and original function buttons. It can be removed and replaced with a structural cover plate in the event the user prefers none or an alternate solution.
Access to battery and SD card without the removal of the grip.
Provision to accommodate Leica’s Finger Loop accessory.
Accommodates an Apple AirTag™ securely and invisibly.
Arca-Swiss mount compatible.
Peak Design Capture Clip and Travel Tripod compatible without any need of an adapter plate.
Additional #1/4-20 screw mount for additional accessories.
Bottom anchor lug to allow wrist or Leica CL style camera strap configurations, also sized for easy attachment of a Peak Design anchor.
Anti-tamper approach, where access to the Apple AirTag™ requires removal of the grip, and the grip securing screw is an anti-tamper design.
Mounting screw incorporates a retaining clip to prevent loss of the screw.
High Density EVA padding on contact surfaces to protect the camera.
Center of lens mark on base plate to aid in aligning with tripod/clamp mounts center axis.
Anticipated Shipping date of Pre-orders : April 7, 2025
Please note : We do NOT collect duties, customs charges, nor VAT charges for international orders. The purchaser will be responsible for these and any related charges.
Designed for the Leica Q3 (both the 28 AND the 43!), this hand grip offers features not found on hand grips currently on the market. The patent pending design features functions used by passionate photographers, all integrated into one platform, integrated into one unified product.
The He3 is NOT compatible with the Q2 (please look to the He2 for that!), and could potentially cause physical damage to the Q2 if there is an attempt to marry the two. The He3 utilizes a registration pin that aligns with a hole absent on the Q2, and the lack of the registration hole will cause the pin on the He3 to impact the base plate of the Q2. Also notable, due to differences in the bottom arrangement of the compartments, access to those compartments would be restricted.
THIS IS A VERY SPECIAL EDITION, and is limited to ONE. The finish in natural silver aluminum was just too lovely to not offer it, so we are having two done in a clear anodized finish. We only have one image of the test sample, so the images below are not representative of the final product. There will be NO returns accepted for these, so please be sure you want it in silver.
Key Features:
Made of fully CNC’d 6061-T6 aluminum for a combination of exceptional strength and light weight. Each are hand-assembled and inspected individually. Every single one.
A modular thumb grip attachment that frees up the hot shoe for full use and access without compromising the desire for a thumb support, and still allows full uncompromising access to all controls and original function buttons. It can be removed and replaced with a structural cover plate in the event the user prefers none or an alternate solution.
Access to battery and SD card without the removal of the grip.
Provision to accommodate Leica’s Finger Loop accessory.
Accommodates an Apple AirTag™ securely and invisibly.
Arca-Swiss mount compatible.
Peak Design Capture Clip and Travel Tripod compatible without any need of an adapter plate.
Additional #1/4-20 screw mount for additional accessories.
Bottom anchor lug to allow wrist or Leica CL style camera strap configurations, also sized for easy attachment of a Peak Design anchor.
Anti-tamper approach, where access to the Apple AirTag™ requires removal of the grip, and the grip securing screw is an anti-tamper design.
Mounting screw incorporates a retaining clip to prevent loss of the screw.
High Density EVA padding on contact surfaces to protect the camera.
Center of lens mark on base plate to aid in aligning with tripod/clamp mounts center axis.
Anticipated Shipping date of Pre-orders : April 7, 2025
Please note : We do NOT collect duties, customs charges, nor VAT charges for international orders. The purchaser will be responsible for these and any related charges.